Cutting Stamped/Printed Greetings Without Canvas Workspace Youtube Live 2nd August 2020

Updated: Aug 4, 2020

In tonights Youtube live I showed how you can cut stamped greeting directly on your ScanNCut machine without having to use any manual drawn in lines or Canvas Workspace.

This is one of the things I get asked how to do a lot. This should also work with printed greetings that you make on your computer.

Im using an SDX2200D machine, using the offset feature, on this series of machines (DX/SDX) the machine will add an offset to the existing design, so you will have two objects on your mat after you have applied the offset function, I explain how to delete the original.

On a CM model machines I dont think you have two objects after applying the offset.

I think from memory you will just see your offset only, so you can skip the delete step.

Everything else should be the same. I don't normally post the Sunday night Youtube lives here on my blog, but as this is one of the most requested things I get asked about I thought I would put it here on my blog with the video. I hope it helps.

I have shown an alternative method some time ago and that is here if you wish to watch the video. This one involves drawing in some lines manually.

Don't forget I now offer 1 to 1 Private ScanNCut Online lessons via Zoom you can find all the details Here and have a look at some of my recent testimonials Here

85 views0 comments

Recent Posts

See All

New Forum On My Website

Im trying out a forum, I've added it to my website, this is independent of the blog, so if you are subscribed already to my blog, you will still have to sign up to use the forum if you want to. Subscr

Applelover53 2018
Email -